MGG Intelligent Electromagnetic Flowmeter
Source: Kaifeng Wylie Flow Instrument Co., Ltd. | Release Date: October 6, 2011, 11:20:05 AM | Views: 258
I. Overview of the Intelligent MGG Electromagnetic Flowmeter:
The Magne W3000 PLUS intelligent electromagnetic flowmeter is a high-performance and highly reliable flowmeter. It is based on the proven successful Magne W3000 flow measurement technology of Yamatake Corporation, widely used in the petroleum, chemical, steel, food, power, papermaking, water treatment industries, etc.
II. Characteristics of the Intelligent Electromagnetic Flowmeter:
- The measurement of the intelligent electromagnetic flowmeter is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity.
- The measuring tube of the intelligent electromagnetic flowmeter has no obstructive components or pressure loss, requiring a lower straight pipe section.
- The sensor of the intelligent electromagnetic flowmeter can be equipped with grounding electrodes to achieve good instrument grounding.
- The sensor of the intelligent electromagnetic flowmeter uses advanced processing technology, giving the instrument excellent negative pressure resistance.
- The Magne W3000 PLUS converter uses an LCD backlight display, making readings easier under reflected sunlight or in dark rooms.
- A 90-degree rotating display screen installed on the pipe improves the visibility of the integrated flowmeter.
- Parameters can be set via infrared touch buttons, allowing safe settings without opening the converter cover in harsh environments.
- The converter of the intelligent electromagnetic flowmeter has self-diagnostic alarm output, empty load detection alarm output, upper and lower limit flow alarm output, two-level flow value alarm output, and other functions.
- The intelligent electromagnetic flowmeter is not only suitable for general process detection but also for the measurement of slurries, pulp, and paste-like liquids.
- The high-pressure electromagnetic flowmeter sensor is made using patented technology, specifically designed for use in the petroleum and chemical industries.
III. Technical Parameters of the Intelligent Electromagnetic Flowmeter:
- Nominal Diameter: DN6 ~ DN3000mm
- Nominal Pressure: 0.6 ~ 70MPa
- Accuracy: ±0.5% of reading; optional ±0.3% or ±0.2% of reading
- Lining Material: PTFE, PFA, F46, chloroprene rubber, polyurethane rubber
- Electrode Form: Standard type, scraper type, replaceable type
- Electrode Material: Molybdenum-containing stainless steel, Hastelloy B, Hastelloy C, titanium, tantalum, platinum-iridium alloy, tungsten carbide-coated stainless steel
- Medium Temperature:
- Split-type: Chloroprene rubber lining, polyurethane lining: -10℃~+80℃
- PTFE lining, PFA lining, F46 lining: -10℃~+160℃
- Integrated type: -10℃~+80℃
- Ambient Temperature: -25℃~+60℃
- Ambient Humidity: 5~100％ RH (relative humidity)
- Medium Conductivity: ≥5s/cm
- Measurement Range: 1500:1, velocity setting < 15m/s
- Structural Form: Integrated type, split type, immersion type, explosion-proof type
- Protection Level: IP65, IP68 optional (IP65: dustproof, spray-resistant; IP68: dustproof, continuously submersible, limited to split type)
- Explosion-proof Mark: ExmbⅡT4
- Product Standard: JB/T9248-1999 Electromagnetic Flowmeter