Article source: Beijing Little Swan Washing Machine Repair Phone http://blog.tianya.cn/blogger/blog_main.asp?BlogID=3446359. Little Swan Washing Machine, during washing, the spin-dry drum also rotates. Fault inspection: Upon inspection, it was found that the centrifugal shaft rotates in a clockwise direction, which is caused by the brake being too loose. Adjust the adjustment screw of the clutch's fork, and after backing out one to two turns outward, tighten the nut; otherwise, it will still loosen after spin-drying. There should be about 5mm gap left between the fork and the adjusting screw. The head of the fork should align with the center of the ratchet wheel, and the fork head should enter two-thirds of the pawl teeth. After the above adjustments, conduct a test run, and the washing machine works normally. Fault analysis: In an automatic washing machine, during washing, the agitator rotates while the spin-dry drum should not rotate. If the spin-dry drum also rotates, first carefully observe and determine the direction of rotation of the spin-dry drum, then inspect accordingly. If the centrifugal bucket rotates counterclockwise, this is often due to the torsion spring of the clutch breaking or slipping (the torsion spring fits too loosely with the spin-dry bucket). When the washing shaft rotates counterclockwise, the reverse prevention function of the torsion spring is lost, causing the spin-dry shaft and bucket to rotate together.