**Measures for Handling:** Remove the cotter pin from the connection accessory between the electromagnet and the drain valve rod, unscrew the drain valve cover counterclockwise, remove the valve core, then take out the foreign object, and the fault will be resolved.
**Fault Phenomenon:** The washing machine continues to operate in the wash cycle and cannot switch to the rinse cycle.
**Analysis and Maintenance:** Based on the fault phenomenon, after careful inspection, it was found that there was a foreign object stuck inside the drain valve core. Due to the improper closure of the drain valve, water leakage occurred, causing the water level in the washing tub during the wash process to not maintain the set level. This led to the washing machine repeatedly resetting the computer's timer, resulting in the fault described in this case.
**Emergency Handling:** Tilt the washing machine sideways, remove the rear cover, take off the steel wire clip and hose connected to the drain valve, then pull the drain valve rod toward the electromagnet to remove the foreign object from inside the valve core.
**Source of Information:** Beijing Samsung Washing Machine After-sales Service Phone Number: [http://blog.tianya.cn/blogger/blog_main.asp?BlogID=3451922](http://blog.tianya.cn/blogger/blog_main.asp?BlogID=3451922).
**Samsung Fully Automatic Washing Machine Continuous Washing Issue**