Now let me introduce the method of using a tow fork to tow an LPG transport tank car. Let's take a look at the instructions provided by Hubei Chengli Special Purpose Vehicle Co., Ltd.: 4, Start the reverse gear of the wrecker vehicle so that the cross arm is inserted under the bottom of the towed vehicle. When the rear edge of the wrecker vehicle is very close to the towed vehicle, stop and hold the brake. Chassis model: 7YP-14100GXE External dimensions: 4100x1470x1900 Total mass: 2000 Approach/departure angle: -/46 Rated mass: 1144 Front overhang/rear overhang: 1000 Curb weight: 791 Maximum speed: 40.4 Engine: ZS1110-1,YC1110M Horsepower: 1090,1093 Power: 14.7,14.71 Manufacturer: Special features: Axle number: 2 Front wheelbase: Axle distance: 2800 Rear wheelbase: 1200 Tire quantity: 3 Tire specification: 5.00-14/6.50-16 Fuel type: Diesel Spring leaf count: Axle load: Number of passengers in cab 2 Special functions: ★ Suizhou modification plant specializes in modification, Foton feces suction truck, Jiangling feces suction truck. Users can bring their own chassis for our factory to install. ★ The feces suction truck tank is made of carbon steel with a turtle back design that never deforms, equipped with Hangzhou Weilong vacuum feces suction pump. ★ The feces suction truck can also be used as a dual-purpose vehicle. ★ The feces suction truck has self-suction and self-discharge functions, making it convenient to suck with high vacuum degree and long suction range.
1, Remove the front support frame from the cross arm. Main technical parameters Product name: Three-wheeled feces suction truck Emission standard: No procedures Feces suction pump: 3, Observe and choose the support point of the towed vehicle. Usually, you can choose the main beam, axle or spring steel plate. 2, Insert the fork seat into the cross arm, adjust the width appropriately, and ensure that the locking device of the fork seat is inserted into the space of the cross arm. 5, Select the fork in the tool box according to the requirements of the support point. Operators can choose forks suitable for the axle or spring steel plate according to actual conditions. 6, Position the telescopic arm so that the fork and the support point make safe contact. When positioning the fork on the telescopic arm, it is best to ask bystanders to leave, and the operator should also try to avoid it to prevent the fork from bouncing out and causing an accident. 7, Then follow the operation procedure of the l-arm wheel support, and the unloading method is the same. The above is only for reference. Please refer to the contract content when purchasing a vehicle. Our company reserves the right to improve the product. Call the sales hotline immediately at 0722-3229933, and we will provide you with detailed services.