Nightfire: Skller V3 is a simple network management software that can bypass any ARP firewall with the aim of limiting traffic. This Skller V3 is much better than those so-called "network scissors" tools. I remember during a networking class a few weeks ago, after we finished our experiments and were browsing the internet, suddenly we couldn't access it anymore. At first, we thought the teacher had cut us off, but later we found out that a classmate nicknamed "Zhang Genius" was experimenting with the "network scissors" tool on all of us (the network lab only had experimental software installed, no other security software). I've played with this kind of tool a few years ago, but generally speaking, people who use this kind of tool usually have low moral standards and hold grudges easily. I won't go into too much detail. Today, I introduce to you this Skller V3 that can penetrate ARP firewalls. Remember, this is not for malicious purposes!
Usage:
1. Select the working network card in the parameter settings;
2. Check if the gateway information and local machine information are correct. If not, manually input them without saving;
3. Click on traffic detection, manual addition, or automatic scanning to fill in the target list;
4. Set up a proxy, preferably different from the target. After setting up the proxy, only the proxy host will receive fake traffic;
5. Select the host whose internet speed you want to limit;
6. Start control.
Skller V3beta Update Notes:
1. Added MAC manufacturer display;
2. Fixed the bug where the local IP address appeared;
3. Added proxy function;
4. Added function to detect similar products. When Skiller v2 is detected, the status bar text will turn red and a prompt will appear;
5. Added overall network load display;
6. Interface adjustment;
7. Updated traffic statistics unit.
Special Note:
Skller V3 integrates upstream, downstream, and hijacking without ARP spoofing. It can bypass any ARP firewall. Traffic detection is in sampling mode, and the intensity can be increased during detection.
Note: This version does not require installation of WinPcap, but requires .NET Framework 2.0. Wireless network cards are not supported.
Download address for Skller V3