Beijing Samsung Washing Machine Repair Phone Editor.
Samsung After-sales Service Case Analysis: XQB60-G85 Type Washing Machine, Slow Water Inlet
Analysis and Inspection: Since water can enter, it indicates that the water inlet control circuit is working normally. The reasons for the slow water inlet speed are:
1. Too low municipal water pressure;
2. The water inlet valve or filter screen is blocked by debris, reducing the water flow;
3. The water inlet pipe joint is not sealed properly or the water inlet pipe is broken, causing a large amount of water leakage. After checking the water inlet pipe joints and pipes without finding any leakage, we disassembled the water inlet valve for inspection and found that the center hole was blocked by debris.
Fault Phenomenon: After powering on and starting, water can enter but the water inlet speed is slower than normal.
Handling Measures: Remove debris from the filter screen and water inlet valve to eliminate the fault.