Product
T80, Direct Drive Motor Turntable
Power Supply
AC 110-220V, 50/60Hz, 13W
Dimensions
450mm (W) x 353mm (D) x 156mm (H)
Weight
11 Kg
Turntable Section
Manual three-speed
Motor: 16-pole, 3-phase motor
Drive Method: Direct Drive
Platter: Diameter 332mm, aluminum cast platter
Playback Speeds: 33 1/3, 45, and 78 rpm
Wow and Flutter: Less than 0.1% at 33 1/3 rpm speed, WRMS (JIS WTD)
Signal-to-Noise Ratio: Greater than 55dB (DIN-B)
Pitch Control: +/- 10%, +/- 20%, +/- 50%
Electronic Brake
Starting Torque: Greater than 4.5kgf·cm
Startup Time: 0.2~6 seconds (adjustable as needed)
Brake Time: 0.2~6 seconds (adjustable as needed)
Speed Switching Time Required
- From 33 1/3 to 45 rpm less than 0.2 seconds
- From 45 to 33 1/3 rpm less than 0.2 seconds
- From 33 1/3 to 78 rpm less than 0.5 seconds
Tonearm Section
Type: S-shaped tonearm
Usable Tonearm Length: 230mm
Tracking Error Angle: Less than 3 degrees
Anti-skating Range: 0~3 grams
Suitable Cartridge Weight: 13~18 grams (including headshell)
Output: 1.5~3.6mV at 1KHz 5cm/sec
Cartridge: AT-3600L
Frequency Response: 20Hz~20KHz
Channel Separation: Greater than 15dB
Channel Balance: Within 2.5dB at 1KHz