Whirlpool fully automatic washing machine: the dehydration braking time is too long.
Fault phenomenon: After dehydration, the braking time is too long.
Analysis and maintenance: According to the phenomenon, it is judged that the fault is caused by the brake band not being able to hold the dehydration shaft brake wheel tightly, which reduces the braking friction. The main causes of the fault are:
1. The brake band on the clutch is installed crookedly, the lining is worn, or the securing screw is loose;
2. The brake spring is loose, broken, or has lost elasticity;
3. The brake rod is held by the pawl fork and cannot return to its original position;
4. The electromagnetic iron core is blocked by debris and cannot be fully extended. After checking one by one, it was found that the brake spring had broken.
Solution: After replacing with a same specification spring and testing the machine, the fault was eliminated.
Source of article: Beijing Whirlpool Washing Machine After-sales Service Phone http://blog.tianya.cn/blogger/blog_main.asp?BlogID=3476390.