Emulsified wax is required. ~ Wood waterproofer
I. Technical specifications of wood waterproofer:
1. Appearance: Grayish-white homogeneous translucent liquid;
2. Solid content: 30%;
3. pH value: Neutral;
4. Stability: Emulsified with special neutral non-ionic emulsifiers, avoiding the previous instability and easy stratification caused by alkaline saponification. Sealed and stored in a cool place, it can be stored for two years without stratification, breaking emulsion, or forming lumps.
II. Performance characteristics of wood waterproofer:
Resistant to acids, alkalis, hard water, strong water solubility, stable emulsion, arbitrary ratio of water dilution without stratification, breaking emulsion, or forming lumps, long shelf life, high solid content, and good dispersibility.
III. Application scope of wood waterproofer:
Used for wood waterproofing, it can be sprayed, soaked, or heated and boiled. After drying the moisture, the waterproofer can penetrate into the fiber pores and form a waterproof layer on the surface of the wood, achieving a waterproof effect.