Source: Beijing Ronshuda Washing Machine Repair Center http://blog.tianya.cn/blogger/blog_main.asp?BlogID=3447654.
Fault Analysis and Maintenance: The main causes of this fault and their troubleshooting methods are as follows:
(1) Leakage at the water inlet pipe connection due to unevenness at the faucet interface, poor contact with the sealing washer, or loose securing screws. This will cause leakage during washing. Troubleshooting methods: ①Repair the faucet interface; ②Adjust the sealing ring. If the faucet interface is cracked or stripped, it must be replaced.
(2) Wear of large and small oil seals. Rust marks caused by oil seal seepage can be observed from the bottom of the washing machine. If there is seepage from the small oil seal, there will be a circle of black lines on the lower side of the box wall. These are oil stains that have splashed onto the box wall from inside the ratchet. The oil seal should be replaced, and the spring clip and clutch sleeve should also be checked for rust. If there is any damage, they must be replaced.
(3) Poor sealing and pipeline cracking. Leakage from water storage components (water inlet valve, drainage valve, water container) and water inlet and outlet pipes, overflow pipes, is often caused by poor sealing (at the connection) or pipeline cracking. They should be re-glued or replaced.
Ronshuda washing machine leaks water during washing.