Fault Analysis and Maintenance; This fault has four different situations: (1) After the power is turned on, the fuse immediately blows. This fault is usually caused by a short circuit in the power cord or inside the socket. Replacing the power cord or socket can fix the fault. (2) Fuse blows when water enters. This fault may be caused by the water inlet valve or an internal short circuit, so the water inlet valve should be replaced. (3) Fuse blows during washing. A short circuit in the internal micro-motor of the program controller, leakage of the washing motor or capacitor can all cause this fault. Replacing the corresponding motor or capacitor can fix the fault. (4) Fuse blows during drainage. A short circuit in the electromagnetic coil or drainage circuit wiring can both cause this fault. Replacing the corresponding components or parts can fix the fault. After the Little Swan washing machine is powered on, the fuse blows. For Beijing Little Swan Washing Machine Repair Phone, please refer to the Beijing Little Swan Washing Machine Repair Center at http://blog.tianya.cn/blogger/blog_main.asp?BlogID=3446359 for more information.