Apple official has formally issued Mac OSX Leopard , hackers have already made A cracked version of the DVD, Let us easily install Leopard system on any PC! The following is the installation tutorial, but still be careful, if there is data on the hard drive, it is best to do a backup!
Before installation, you need to prepare:
Back up important data!
Cracked Leopard DVD image
zip file containing the patch
A formatted USB flash drive (disk format is FAT32)
Step 1 Prepare
Use a burning software such as Nero to burn a DVD image to a single layer DVD disc.
Format the USB flash drive with the disk mark set to "Patcher" (without quotes).
Extract the Zip file and put it in the USB flash drive.
Your USB flash drive should now contain a folder named "files".
Step 2 Install Leopard
Now that you have the cracked DVD in your hand, boot from the disc and start installing!
After booting from the CD, the installation wizard will load, it will take some time, please wait patiently.
Select a language, make sure you select "Customize" and deselect all displayed Packages.
OK, Leopard is ready to install, it will take a while, you can have a coffee break.
will ask you to restart at the end, so restart. Before restarting, make sure the USB flash drive is connected to your PC.
Step 3 Crack Leopard
Now that you've installed Leopard, it's time to crack (patch) it. Before cracking, we need to get it from Leopard again; DVD boot.
Wait for the Darwin Bootloader to load. Once it's loaded, press F8. You will see a pop-up box. Type -s and press Enter. The DVD will be loaded in Verbose mode. Watch for any error messages. There shouldn't be any problem.
After loading, select the language. Then you will see the welcome screen. At this point, you go to a tool terminal.
After the terminal is loaded, type the following command: cd... cd .. cd Volumes cd Patcher cd files
Now it's time to crack. Type the following command on the terminal: ./9a581PostPatch.sh
The cracking program will run.
When the cracking program is allowed to finish, restart can be.
Step 4 Congrats! You've done "Mission Impossible"
Note that the cracking step did not do too much additional testing, so it is possible that your sound card, network card is not working properly. If there is A problem can be by OSX86Scene Ask for help. Note that we don't provide download links for the hacked DVD images and Zip files, because I don't want to receive A letter from Apple's lawyers. You can find these files at Demonoid.
Below is a screenshot of the Mac interface.
Some updates and descriptions:
This hack runs with the SSE3 instruction. Intel PC
You want to format your Leopard partition to HFS+
Make sure you install Leopard to Master Boot Record (MBR) instead of GUID
Text and pictures Source: http://dailyapps.net/2007/10 /hack-attack-install-leopard-on-your-pc-in-3-easy-steps/